The number of screws to be tightened can be set from 1 to 99, with the remaining number counted down after each screw is tightened.
● A buzzer will sound when the final screw has been tightened to notify you of screw tightening completion.
● The countdown number is automatically reset after all screws have been tightened so that work can start on the next job immediately. The screwdriver will not be operable until the next “work set confirmation” SET signal is input (not applicable to SC3 Series).
● Prevents confirmation tightening, additional tightening and secondary tightening from being counted.
● Can be used as a normal power supply by disabling the count function. (Applicable only to BLOP-STC3 and CLT-70STC3)
Connectable screwdrivers | for one driver | |
Primary input power source | AC100V (50/60Hz) AC120V(50/60HZ) |
|
External Dimensions (mm) | 160(W)×175(D)×84(H)mm | |
Accessories | Power supply cord: 1.8m with ground wire (1pc) Crimp-type terminals: 8pcs |
|
Plug type | A-1/A-2 | |
Compatible Screwdrivers |
VB series | VB-1510-OPC(100V/120V)/VB-1510-18-OPC(100V/120V)/VB-1820-OPC(100V/120V)/VB-3012-OPC(100V/120V) VB-1510PS-OPC(100V/120V)/VB-1510PS-18-OPC(100V/120V)/VB-1820PS-OPC(100V/120V)/VB-3012PS-OPC(100V/120V) |
VBH series | VBH-1820-OPC(100V/120V)/VBH-3012-OPC(100V/120V) VBH-1820PS-OPC(100V/120V)/VBH-3012PS-OPC(100V/120V) |
|
VZ series | VZ-1510-OPC(100V)/VZ-1820-OPC(100V)/VZ-3007-OPC(100V)/VZ-3012-OPC(100V) VZ-1510PS-OPC(100V)/VZ-1820PS-OPC(100V)/VZ-3007PS-OPC(100V)/VZ-3012PS-OPC(100V)/VZ-4506PS-OPC(ショックレススタンド付き/100V) |
Plug type
Voltage | 100V | 120V | 220-240V |
Plug type | Type A | Type A-2 | Type C |
![]() |
![]() |
![]() |
Reviews Screw counter VZOP-STC
Bạn chưa đánh giá sao cho sản phẩm này
Đánh giá ngay