With This
No Mistakes
・ Detect errors in screw fastening in real time with high accuracy by counting the pulse of the motor.
・ Misplaced screws of different type or length, recessed screws or floating screws due to seized cables are now detected.
・ Direct teaching allows a simple setting
・ Display panel indicates qty of the screws needed to be fastened.
・ Installed serial port (RS-232C) makes it possible to set the driver by remote control and record pulse values of each screw tightening for traceability.
Specifications:
Start | Two-way(Push/Lever)Start Type | |
Output Torque Range | N.m | 0.3-1 |
Ibf・in | 2.6-10 | |
kgf・cm | 3-10 | |
Torque Switching | Stepless Adjustment | |
Unloaded Rotation Speed(r.p.m) |
Low | 1000 |
High | 1500 | |
Screw Size(mm) | Screw size | 2.3-3 |
Tapping | 2-2.6 | |
Bit |
Hios shank | H4 |
Hex shank | H5 and 5HEX(both can be used) or 1/4HEX | |
Power Supply | Model | BLC-45 BLC-70 BLC-80 Use only 2(HI) power outlet with the models. These models may not perform properly on 1(LOW) power outlet.
|
External Dimensions(mm) |
Grip | 38 |
Length(mm) | 235 | |
Weight(g) | 425 | |
Accessories | Bit H4 | +♯1 (∅4.0×40mm) +♯2 (∅4.0×40mm) |
Bit H5 | +♯1 (∅5.0×60mm) +♯2 (∅5.0×60mm) |
|
Bit 1/4HEX | +♯1 (5.0×50mm) +♯2 (5.0×50mm) - (5.0×50mm) |
|
Cord length(m) | 2m(6p) | |
Lshaped hexwrench | Width cross flats:5mm,1pc | |
Torque Range Table | ![]() |
Reviews BLG-5000 BC2-15 Brushless Screwdriver (Built-in Screw Counter + High Speed)
Bạn chưa đánh giá sao cho sản phẩm này
Đánh giá ngay